It lists a set of minimum requirements, which you clearly do not meet. You don't have a computer with the right processor, it isn't fast enough, you don't have enough RAM, you probably don't have enough hard drive space, you don't have the right video card, I'm guessing that you might not have the latest OS (could be wrong about that one).

 All of this info is listed on the box, as well as the Aperture Web page. You need to do just a little bit of reading before making an investment such as this (unless of course you simply got the dmg file from bit torrent or some other file sharing site.)

Minimum System Requirements

One of the following Macintosh computers:

• Power Mac G5 with a 1.8 gigahertz (GHz) or faster PowerPC G5 processor
• 15- or 17-inch PowerBook G4 with a 1.25 GHz or faster PowerPC G4 processor
• 17- or 20-inch iMac G5 with a 1.8 GHz or faster PowerPC G5 processor
• Not supported on Intel-based Mac computers with Rosetta; a Universal version to be available before the end of March 2006

Mac OS X version 10.4.3 “Tiger” or later

1GB of RAM

5GB of disk space for application, templates, and tutorial

DVD drive for installation

One of the following graphics cards:

• ATI Radeon x600 Pro or x600 XT
• ATI Radeon X800 XT Mac Edition
• ATI Radeon X850 XT
• ATI Radeon 9800 XT or 9800 Pro
• ATI Radeon 9700 Pro
• ATI Radeon 9600, 9600 XT, 9600 Pro, or 9650
• ATI Mobility Radeon 9700 or 9600
• NVIDIA GeForce 6600 LE or 6600
• NVIDIA GeForce 6800 Ultra DDL or 6800 GT DDL
• NVIDIA GeForce 7800 GT
• NVIDIA Quadro FX 4500

<a href="http://www.jdempsey.com"><img src="http://www.jdempsey.com/media/CreativeGuy_macnn.gif"  alt="CreativeGuy" title="CreativeGuy" /></a>

It is possible to install Aperture on a machine that doesn't meet the requirements. Please use that search bar up there before posting questions that have already been installed, and make at least a half-assed attempt to write legibly.

questions that have already been installed ?

1. I meant to type "answered".

2. Was your reason for posting this to look like a smarty? Well, don't, because out of those two links you posted, neither works.

http://guides.macrumors.com/Aperture

Do you have a solution or do you inspire to be a nyt book critic

like to install the program

tiger 10.4.4

Read this: http://creativebits.org/apperture

Mackie

Thank you

downloded the Pacifist program

Is the $20.00 fee required?

specificy steps to create a read /write image on desktop.

Open Disk Utility, put the DVD in the drive, select New Image from Disk from the menu. Make sure it's writeable. Pacifist is NOT needed. Download the image from RapidShare, replace the program and the installer with the contents.

open disk utility
below the hard drive icon appear

1) Aperture icon 4.4 gb ....do I click on this icon
2)Aperture 1.0 cpu.crack

do I
click on ...new image+ ?
2) it request that I

1 ....save as
2..... where

downloaded

pacifist
and rapid share

how do you download image from rapid share?

thanks

how do you replace "INSTALLATION CHECK" the program and the installer

Step 4..

Press return to access the "RESOURCES" folder and replace "installation check"

Step 5..
Now you can install with your own serial number.

I have written down how to do it in the other thread, and that RapidShare file also has instructions attached. If you're a retard or can't follow directions, too bad. I'm not going to write it down a third time.